800-910-2885

K&R Weigh Systems

 

 

Waste Transfer Stations have been using Loadrite scales on their loaders to save money & time
The following is a case study done by a waste transfer station in a metropolitan market region. Actual operating figures were used:
 
Based on moving the equivalent amount of material (tonnage):

 

  • Trucks dedicated for loads per day went from 9 to 6 to move the same material.
  • Truck loads total per day went from 36 to 24 to move the same material.
  • Average loads per month before the scale was 600-680 loads underloaded.
  • Average loads per month after scale was 400-450 loads properly loaded.
  • These numbers do not include overload ticket savings.
  • It also does not include savings on man hours spent topping up loads and dumping off loads when trucks had previously been incorrectly loaded.
  • The customer explains “It’s hard for us to put a dollar value on man hours spent on the above topic coupled to the new convenience & increased productivity.”
  • Average savings first month was $6,000. (during operator training & scale familiarization period)
    Average monthly savings are now currently $8,000 to $10,000. (depending on amount of material on the floor)

This adds up to over $ 80,000 savings per year!


 

Be sure to also look into our safety division by Brigade.

 


 

 

Copyright © 2005 K&R Weigh Systems